1000 Mermaid Lane • Wyndmoor, PA 19038 • 800-319-7359 • 215-233-2600 • Fax:215-233-5653

The following partial list of our facilities is intended to illustrate Metlab's unique range of capabilities.

Gas Carburizing/Carbonitriding (1500° - 1850°F)

Maximum Load Sizes
Pit Furnace - 38" Diameter by 156" High
Bell Furnaces (5) - 72" Diameter by 84" High
Pit Furnace - 54" Diameter by 180" High
Pit Furnace - 144" Diameter by 96" High
Pit Furnace - 180" Diameter by 144" High

Gas Nitriding/Nitrocarburizing (900° - 1200°F)

Maximum Load Sizes
Pit Furnace - 22" Diameter by 36" High
Bell Furnaces (5) - 72" Diameter by 80" High
Pit Furnace - 28" Diameter by 252" High
Pit Furnace - 144" Diameter by 96" High
Pit Furnace - 180" Diameter by 144" High

Protective Atmosphere Hardening, Annealing, Normalizing, Brazing up to 1950°F

Maximum Load Sizes
Bell Furnace - 72" Diameter by 72" High
Pit Furnace - 54" Diameter by 180" High
Pit Furnace - 144" Diameter by 72" High
Pit Furnace - 180" Diameter by 144" High
Rotary Hearth Furnace - Parts up to 24" Diameter
Gantry - 38" Diameter by 156" High

Open Furnace - Hardening, Annealing, Normalizing, Solution Treating, etc. up to 2200°F

Car Bottom #1 - 78" Wide by 78" High by 192" Long
Car Bottom #2 - 96" Wide by 120" High by 276" Long
Bell Furnace - 72" Diameter by 84" High
Pit Furnace - 144" Diameter by 72" High
Pit Furnace - 180" Diameter by 156" High

Temper Furnace - Close Temperature Control - Range 200°F - 1250°F - Solution Treating, Aging, Stress Relieving, Tempering

Box Furnace - 38" Wide by 44" High by 65" Long
Car Bottom - 78" Wide by 78" High by 192" Long
Car Bottom - 96" Wide by 120" High by 276" Long
Bell Furnace - 72" Diameter by 84" High
Pit Furnace - 144" Diameter by 72" High
Pit Furnace - 180" Diameter by 144" High

Abrasive Blast and Paint

Blast Room - 192" Wide by 96" High by 144" Long
Separate Paint Room

Straightening

Hydraulic Presses - Covering broad range of sizes up to 300 ton capacity 
Press Quench Capability for flat parts up to 24" in diameter

Metallurgical Laboratory

Full compliment of metallurgical measuring equipment, including polishing and lapping facility, microscopes and photographic capability, fixed and portable hardness testers, microhardness testers, and access to mechanical testing facilities.